Gabriola Island Is a gorgeous little island about 3.1 miles off Vancouver Island In B.C. Canada

Photo source:  Flickr/ActiveSteve

gabroila-island-cabin-1916-orig.jpg

Home to about 4,000 people, it can be reached via ferry or floatplane. (This photo was taken from a float plane.)

Photo source:  Flickr/Jo-in-BC

gabroila-island-cabin-1918-orig.jpg

Arriving on the by boat is a beautiful trip as well. The weather is mild, the air is clean and nature abounds.

gabroila-island-cabin-1917-orig.jpg

Sam’s design is modern and chic. At less than 108 sq feet, the tiny house would pack in a lot of features and great design inside.

gabriola-resizes-2146-orig.jpg

With his design ready, he got to work on his site, which was on an open piece of land, at a distance from any trees that might fall during storms.

This site was actually his second choice. His first choice was a site amongst trees, but luckily a storm came in before he started building and after the site was hit with deadfall crashing down, Sam realized he needed a more open space for his building.  It’s awesome he discovered that before he built his cool house.

gabroila-island-cabin-1921-orig.jpg

Working mostly on weekends once or twice a month, Sam tried to “chunk” project parts for each weekend.

On the first weekend, he got the post sets and the concrete poured for part of the foundation work.

gabroila-island-cabin-1920-orig.jpg

He used string lines to help him line up the brackets for the beams, which would be dropped into poured concrete.

He was nervous something would shift, but luckily the beams dropped in perfectly and the brackets were aligned and at the right height.

gabroila-island-cabin-1922-orig.jpg

The floor of the tiny house cabin is supported by two large 16’ beams resting on concrete piers. This part was a lot of work to make sure everything was level and square.


 

gabroila-island-cabin-1892-orig.jpg

The floor was built with beams bolted to the piers, joist handers, and joists.

gabriola-resizes-2139-orig.jpg

The floor surface consisted of ¾” treated plywood that was laid down with glue and screws.


gabroila-island-cabin-1894-orig.jpg

Sam didn’t have a workshop at the site since there was no power there. He broke down the building into modules.

The framing work was done in his garage, which he then tagged and took over to the site in his truck. 
 

gabroila-island-cabin-1893-orig.jpg

At the site, he assembled the tagged bundles. He says it didn’t take long but he had to make a few dozen trips to his truck to charge his drill (since the site didn’t have power).

gabroila-island-cabin-1895-orig.jpg

He assembled the wall and roof units in a weekend, using print-outs from Sketch-up diagrams that helped him make sure everything was in the right place.

gabroila-island-cabin-1896-orig.jpg

Sam enlisted the help of a friend to assemble the wall and roof since it was easier and safer that way.


gabroila-island-cabin-1897-orig.jpg

Luckily there is a building supply store on the island, which Sam pre-ordered metal roofing from so it would be ready when it was time to do the roof.

gabroila-island-cabin-1898-orig.jpg

Sam’s cabin is off the grid, but he gets power to his cabin using parts purchased online* to make use of solar power.

Once he set this up, he was able to power his tools, laptop, lights, and a music player.  

*The solar parts he got were from Renogy on Amazon.
 
In the winter, he ended up getting an MPPT controller which helped him in lower light conditions. 



gabroila-island-cabin-1899-orig.jpg

He got the insulation in, the wiring done, and vapor barrier installed in a weekend.

gabriola-resizes-2140-orig.jpg

Sam got some nice pine tongue and groove paneling. Amazingly, he used a hand saw for this! Wow, it’ was lot of work but it sure looks beautiful.

gabriola-resizes-2142-orig.jpg

While building his tiny house cabin, Sam had visits from several tree frogs, who seemed to like the cool metal window sills.

He also saw deer, eagles, a mink, ravens and a hummingbird while working his project.

gabroila-island-cabin-1902-orig.jpg

Sam’s house has a really tall ceiling, lots of windows and a loft. These features make the house seem so much bigger than 108 square feet.

gabroila-island-cabin-1903-orig.jpg

Sam refinished an old desk top that somebody was throwing out, and turned it into his dining room table.

gabriola-resizes-2141-orig.jpg

The table turned out great!

gabroila-island-cabin-1905-orig.jpg

The view from the window in the loft is breathtaking.

gabroila-island-cabin-1906-orig.jpg

In the loft, he can see the stars above from his bed, or nature outside during the day.


gabroila-island-cabin-1907-orig.jpg

For the exterior, he used stain on cedar siding for the bottom half.

gabroila-island-cabin-1908-orig.jpg

He found some rough cut shakes on Craigslist which he used for the upper half of the exterior.

gabriola-resizes-2143-orig.jpg

The view from the kitchen is beautiful.

gabroila-island-cabin-1910-orig.jpg

The kitchen has a sink, a countertop, and a coffee maker. He bought an RV gas range to install later.

gabriola-resizes-2144-orig.jpg

He installed a wood stove before the cold weather arrived, which he bought from the “Four Dog Stove” company in Maine.

gabriola-resizes-2145-orig.jpg

When the weather was warmer, he completed the exterior painting and built a deck.


gabroila-island-cabin-1913-orig.jpg

It is impressive and inspiring that Sam built this amazing tiny house cabin despite having no workshop and no tools when he started. He says he learned a ton along the way.

gabriola-resizes-2147-orig.jpg